DANPEX CORPORATION

ET-103

Card Type             Transceiver
NIC Type              Ethernet
Data Bus              AUI via DB-15 port
Network Transfer Rate 10Mbps
Topology              Linear Bus
Wiring Type           Thick coaxial via tap connector

[Image]

                                CONNECTIONS

        Function            Label            Function             Label

  AUI via DB-15 port         CN1      Tap connector for thick      CN2
                                      coaxial cable

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

  »   SQE test disabled                          JP1         Pins 1 & 2
                                                              closed

      SQE test enabled                           JP1         Pins 2 & 3
                                                              closed

  »   Transmit lines not terminated              JP2         Pins 1 & 2
                                                              closed

      Transmit lines terminated with 78          JP2         Pins 2 & 3
      ohms                                                    closed

                             DIAGNOSTIC LED(S)

    LED         Color           Status                Condition

    PWR      Unidentified         On                 Power is on

    PWR      Unidentified        Off                 Power is off

    TX       Unidentified      Blinking       Transceiver is transmitting
                                                      to network

    TX       Unidentified        Off              Transceiver is not
                                               transmitting to network

    RX       Unidentified      Blinking        Transceiver is receiving
                                                     from network

    RX       Unidentified        Off         Transceiver is not receiving
                                                     from network

    CD       Unidentified      Blinking      Collision has been detected

    CD       Unidentified        Off            Collision has not been
                                                       detected

    SQE      Unidentified         On             SQE test is enabled

    SQE      Unidentified        Off             SQE test is disabled